Hanna Büchner-Mack

Hanna Büchner-Mack

Hanna Büchner-Mack
Weitere Ideen von Hanna

Ein leckeres Huhn-Kokos-Spinat-Curry für ein schnelles Abendessen. Dieses Rezept mit nur wenigen Kohlenhydraten ist schnell zubereitet.

Straight-Up Drill Guide - To bore a perfectly perpendicular hole, you need either a drill press or a couple of scraps of wood screwed together. The corner created by the scraps will steer the bit straight in every time. But if you’re looking for an excuse to buy a drill press, forget you ever saw this tip.

Straight-Up Drill Guide - To bore a perfectly perpendicular hole, you need either a drill press or a couple of scraps of wood screwed together. The corner created by the scraps will steer the bit straight in every time. But if you’re looking for an excuse to buy a drill press, forget you ever saw this tip.

Ever cut that last part just a bit too short? There's a solution for that: First, trim off the inside edge of the too-short part. By cutting off the short edge, you effectively make the mitered part longer. Then trim the same amount off the outer edges of the other three sides. Your edging will be a little thinner than you had planned, but nobody will notice.

Ever cut that last part just a bit too short? There's a solution for that: First, trim off the inside edge of the too-short part. By cutting off the short edge, you effectively make the mitered part longer. Then trim the same amount off the outer edges of the other three sides. Your edging will be a little thinner than you had planned, but nobody will notice.

Here's an old favorite trick among woodworkers. Clamp on notched blocks, then add a bar clamp or two to squeeze the joint. This allows you to put a lot of pressure on the joint without buying any special clamps. If you're assembling a four-sided project such as a picture frame, join two corners first. Then, after the glue has set, join the two halves of the frame.

Here's an old favorite trick among woodworkers. Clamp on notched blocks, then add a bar clamp or two to squeeze the joint. This allows you to put a lot of pressure on the joint without buying any special clamps. If you're assembling a four-sided project such as a picture frame, join two corners first. Then, after the glue has set, join the two halves of the frame.

Wenn es darum geht, DIY-Möbel zu färben, speichert gekauft Holz Füllstoffe nicht übereinstimmen!  Dieses Tutorial zeigt, wie man einen DIY Holz Füller perfekt für das Füllen von Nagel Löcher, Risse oder Lücken in Holz machen.  Es braucht nur zwei Zutaten, und am besten von allen wird es deinem Projekt entsprechen!

Wenn es darum geht, DIY-Möbel zu färben, speichert gekauft Holz Füllstoffe nicht übereinstimmen! Dieses Tutorial zeigt, wie man einen DIY Holz Füller perfekt für das Füllen von Nagel Löcher, Risse oder Lücken in Holz machen. Es braucht nur zwei Zutaten, und am besten von allen wird es deinem Projekt entsprechen!